RF Power Splitter, RF Power Splitter 2-Way Divider Combiner frequenza 100-2700M

I tested the splitter on my VNA and was pleasantly surprised. I was particularly interested in the 800 to 900Mhz region, so ran some tests. This is of course bi-directional, inputs may also be outputs and work identically. As a power splitter you would naturally expect 3dB loss when split, so anything close to this is acceptable.At this frequency it showed a 3.2 dB attenuation with an input applied and then measured at each of the 2 outputs. This was identical when measured opposite way round with 50 Ohm terminations which was also, as expected.The attenuation measured between the two inputs (i.e. isolation of the two split signals was -17dB, which again is far better than I expected.The central resistor (100Ohm) used for impedance matching will have no effect on bias-T's, as it is effectively shorted at DC - so this is also Bias-T friendly - another plus....Lastly I checked the SWR, and all was fine at 1.2 - overall a good splitter at this price point.

5*