Variety of sellers appear to measure lock length in different ways. My understanding was that the measurement was of one side then centre then other side. However, some miss Central measurement which is always identical. Sadly this meant the lock was to short for my needs. It does though, unfitted, work well and came well packaged and arrived quickly. I'll keep it in case I get another door it will fit. Thanks.

Non è possibile replicare le chiavi in Italia soltanto in UK e non spedisco fuori nazione

Tutto perfetto, usato ottimo prezzo speciale condizioni perfette, ero a conoscenza dell'impossibilità di duplicare le chiavi in italia ed é un vantaggio una piccola sicurezza in più da to che mio figlio le smarrisce di frequente

Difficile avere serrature a cilindro europeo più sicure a questo prezzo. Sicuramente un best-buy. Consigliatissima

Il cilindro purtroppo contattando YALE casa madre a Bologna mi dicono non posso fare la copia delle chiavi perché è un prodotto inglese quindi penso proprio di rimandarlo indietro 3 chiavi in possesso sono poche

great lock for learning high security picking skills

Bought this to replace an LSH/ERA euro lock that failed.Euro cylinder locks are very simple to replace. There are lots of youtube video's. Just make sure that you get the correct size replacement. The simplest way to do this is to measure your existing lock. The measurements are from the center of the retaining screw to the internal and external sides of the lock. If the measurements are not the same make sure you know which one is for the external and which is the internal as not all replacements fit both ways round.There are two small knobs on the side of this lock. These are visible in the product picture. They are called grip deflectors and are meant to make gripping the cylinder more difficult when someone is breaking in... I suspect that this is after the first part has snapped off.I've checked a lot of different replacements and yale appears to be the only company that has some of its euro cylinder locks with this feature.The lock I was replacing did not have these little knobs on it and the lock did not fit with them still present. I just cut them off with a hacksaw and filed what was left of the raised bits down. The cylinder lock was a very tight fit.The lock now fits fine and works as one would expect.

j'ai acheté ce produit pour le mettre sur une porte neuve en pvc, d'une grande marque française.les 2 petites boules de chaque côté du cylindre empêche de l'insérer dans la porte.ce n'est donc pas un cylindre standard.

Having just had an extension with bifold doors added to the house it annoys me that the locks fitted to, what were very expensive doors, were so cheap.Replacement locks are easy to fit, you info one screw, slide the old lock out and slide the new one in.Obviously you need to measure the existing lock so you know what size to order. Again this is easy, just undo the retaining screw, slide the lock out and then measure the distance from one face of the lock to the middle and then from the middle to other lock race in millimetres. Mine were 40:40, but often one distance is longer than the other.This type of key removes the worry about people picking the lock or using bump keys.It comes with 3 keys and a plastic ID card which you'll need if you want to get more keys cut.These are a useful safety measure. Well made and easy to fit.