è vuoto
è vuotoAdotta il chip ESP32-S3R8 con processore dual-core Xtensa LX7 a 32 bit, in grado di funzionare a 240 MHz SRAM da 512 KB integrata, ROM da 384 KB, PSRAM da 8 MB, memoria flash da 16 MB Wi-Fi da 2,4 GHz integrato e comunicazione wireless dual-mode Bluetooth LE, con prestazioni RF superiori Supporta il passaggio senza soluzione di continuità tra la programmazione Arduino e MicroPython, utilizzo più flessibile Supporta HID, emulando dispositivi di interfaccia umana come tastiere o mouse tramite porta USB per una più semplice interazione con il PC Compatibile con Arduino IoT Cloud, consente di monitorare e controllare il progetto da qualsiasi luogo utilizzando l'app Arduino IoT Cloud
Kyle
Recensito negli Stati Uniti il 3 settembre 2024
This ESP32-S3-Nano Development Board is a fantastic choice for projects needing a powerful and compact microcontroller. The ESP32-S3R8 chip packs a punch, with dual-core processing, integrated Wi-Fi, and Bluetooth LE. The small form factor, similar to the Arduino Nano, makes it ideal for projects where space is limited. Just keep in mind that this version ships without headers, so you'll need to solder those on yourself if you plan to use it with a breadboard.
Kasey
Recensito negli Stati Uniti il 24 agosto 2024
This is a great little ESP32 development board. It's basically a clone of the Arduino Nano ESP32, and behaves exactly like it. I was able to program it with the Arduino IDE with no issues.The description says "no headers", but it really means they're just not pre-soldered. A pin header strip is included in the box.There's nothing to complain about, here. It's just an inexpensive ESP32 development board that works as it should.
Abi
Recensito in Germania il 14 maggio 2024
Das Board ist bestens für viele Projekte (auch eigene) geeignet und hat zudem den Vorteil, daß ein ESP32 mit integriert ist. Das Flashen eines Beispiel-Sketches mit Arduino-IDE ging ohne Komplikationen. Ich habe die Pin-Leisten gleich angelötet, um auf einem Steckbrett einige Tests durchzuführen.Preis/Leistung ist für mich in Ordnung.
Pudelmützer
Recensito in Germania il 11 maggio 2024
Dieser ESP32 ist eine sehr gute Erweiterung in meinem Equipment. Das Board lässt sich sehr leicht mit den Jumpern verbinden. Der Chip kann mithilfe von USB-C am PC angeschlossen werden. Mein PC erkennt ihn sofort und mit der Arduino IDE ist er sofort funktionsbereit. Das Laden des Blink script erfolgt Problemlos.
Nagrom
Recensito nel Regno Unito il 12 ottobre 2024
Firstly had trouble programming it as you have to use the latest Arduino IDE and only the Arduino Nano ESP32 board in board manager, not from the ESP32 boards list. Then once I managed to finally get it programmed, can't seemed to figure out how to flash SPIFFS files and the bluetooth doesn't work (will take forever to appear and won't connect). I know this isn't anything to do with my sketch, as it works on other ESP32 boards I have and the example sketches for bluetooth are also the same. When used in WiFi AP mode, it does appear, but not not really experimented with it too much as couldn't get files flashed to SPIFFS.
Prodotti consigliati
Potrebbe piacerti anche