Carrello

è vuoto

è vuoto
Disponibile

Topping L70 Amplificatore per cuffie NFCA completamente simmetrico - XLR/4,4 mm bilanciato/6,35 mm SE cuffie amplificatore 7500 mW x 2 uscite R2R controllo volume preamplificatore argento

Spedizione gratuita per ordini superiori a 25,99€
279,00€ -65%

99,00€

  • Modulo NFCA ad alte prestazioni L70 utilizza lo stesso modulo NFCA (Nested Feedback Composite Amplifier) dell'A90. L'architettura di feedback ibrido con corrente di tensione e la tecnologia UHGF (UItra High Gain Feedback) garantiscono un'eccellente potenza CC e CA, un valore THD+N estremamente basso e una gamma dinamica assurdamente elevata di 146 dB.
  • Completamente simmetrico ▶️ L'L70 è compatibile con i comuni jack per cuffie, tra cui: XLR a 4 pin bilanciato, 4,4 mm simmetrico, 6,35 mm single-ended e 3,5 mm single-ended. Il circuito dell'amplificatore completamente bilanciato integrato può fornire prestazioni perfette non solo con cuffie simmetriche, ma anche con cuffie sbilanciate.
  • Compatibile con quasi tutte le cuffie. TOPPING ha progettato il L70 per alimentare la maggior parte delle cuffie. Con la sua alta tensione di uscita, può facilmente utilizzare cuffie ad alta impedenza. Con la sua alta corrente di uscita, può facilmente utilizzare cuffie a bassa impedenza. E con un basso rumore in uscita fornisce facilmente IEM ad alta sensibilità senza creare rumore di fondo.
  • Un amplificatore per cuffie, anche un preamplificatore. Il L70 non è solo in grado di far funzionare le cuffie, ma funge anche da preamplificatore. Nella modalità preamplificatore, è possibile ottenere le stesse prestazioni elevate della modalità amplificatore per cuffie e l'impedenza di uscita bilanciata da 20 ohm SE e 40 ohm sono adatte a vari amplificatori finali. Il telecomando completamente funzionale rende il funzionamento ancora più comodo per te.
  • E70 è il miglior dac per L70 ▶️ L70 e E70 hanno lingue e stili di design completamente abbinati, L70 è adatto per quasi tutti i tipi di cuffie. L'E70 e l'L70 possono essere accesi e spenti tramite l'interfaccia trigger a 12 V, in modo che il modello L70 possa essere sincronizzato con l'accensione e lo spegnimento automatico o manuale dell'E70.



TOPPING L70 Amplificatore per cuffie NFCA completamente bilanciato

L70 è un potente amplificatore per cuffie desktop che supporta gli ingressi XLR, RCA e TRS.

Con 2 impostazioni di amplificazione, copre una vasta gamma di cuffie, da auricolari over-ear a bassa sensibilità a IEM ad alta sensibilità.

Se vengono utilizzati più dispositivi in combinazione, il rumore del circuito di terra può essere interrotto regolando l'interruttore GND/LIFT.

Dotato di un'interfaccia di ingresso e uscita trigger da 12 V, L70 può essere acceso e spento in modo sincronizzato con altri dispositivi.
Caratteristiche del prodotto:
Applicazione per amplificatore/preamplificatore per cuffie
4 pin XLR + uscita 4,4 bilanciata + 6,35 mm SAE
Controllo del volume del relè: modalità di uscita 8x con memoria del volume
Moduli NFC
Distorsione armonica DNR 146 dB.
Rumore Impedenza di uscita Potenza massima di uscita 7500 mW x 2 a 32 Ω, 1150 mW x 2 a 300 Ω
Attributo
Dimensioni: 20,0 cm x 13,8 cm x 4,4 cm (comprese le parti sporgenti).
Peso: 800 g
Consumo: 100-240 VAC 50 Hz/60 Hz.
Rinforzo: L/H
Ingresso segnale: 1 x XLR (L+R); 1 x RCA (L+R)
Uscita dell'amplificatore per cuffie:
1 uscita per cuffie da 6,35 mm.
1 presa di uscita per cuffie XLR a 4 pin.
1 presa di uscita per cuffie da 4,4 mm.
Uscita line: 1 x XLR (L+R); 1 x RCA (L+R)
Altre interfacce: 12 V Trigger In (jack da 3,5 mm); uscita trigger 12 V (jack da 3,5 mm).
Gamma di volume: 0 – 99,5 (passo volume 0,5 dB).
Display: LED bianco.
Consumo di corrente in standby:
Sommario
L70 x 1.
1 telecomando.
1 cavo AC.
1 adattatore da 6,35 mm a 3,5 mm.
1 manuale utente (lingua italiana
1 scheda di garanzia


Ali B.
Recensito nel Regno Unito il 7 marzo 2025
After recently delving into the world of open back headphones, and picking up a portable DAC / headphone amp for my phone, I wanted to use my new cans listening to my hifi.However my hifi amp doesn’t actually have a headphone jack. So I had to listen through the headphone out of my old minidisc deck.So I decided to look into a dedicated headphone amp for my hifi. I didn’t need a Dac as I already have told trust Dac-R, so I was looong for purely a headphone amp, with balanced outputs, ideally with a remote, and no DAC. Oh and that sounded amazing.I settled on the Topping L70 as had all the features I need and also had some great reviews. So I bought blind!And I am so pleased I did. This amp sounds absolutely stunning with my Meze 109s. I have never described an amp as ‘smooth’ sounding, but this combo is amazing. Everything sounds just so damned brilliant, but without harshness, without too much of anything. This my description - Smooth. I listen to everything from DnB to guitar rock to classic piano etc. and so far everything g I have thrown at it sound fabulous, except…… Low quality Or poorly mastered tracks are notably poor.Feed this amp and headphone combo quality recordings and it will not disappoint.Oh and for anyone interested, i connect the headphone amp via analogue rca line puts from the ‘record out link’ RCA’s on my Rega Elicit R.
ヒロ
Recensito in Giappone il 18 febbraio 2025
3回目の購入ですが、いつも迅速な対応で商品も、間違いありません。
おじさん
Recensito in Giappone il 4 ottobre 2024
初めはちゃんと電源が入っていたのですが、途中で『r5』のエラーコードが出て、その後0.003と表示されたまま使えなくなってしまいました。直す方法はあるのでしょうか?
Rahul
Recensito negli Stati Uniti il 8 luglio 2023
This is a fantastic amp. I originally had issues with an Smsl c200 I purchased producing clicks/pops on my MacBook (this is apparently an issue with some Smsl products and other dacs with xmos chips through usb). So instead I got this and just used my MacBook’s internal dac, with a 3.5mm to rca cable. The sound is clean and there is a lot of headroom for eq. I don’t have any headphones that are difficult to drive but I have many iems, and sensitive headphones that still sound clear in low gain mode. I had a lot of noise running 3.5mm to xlr from my windows pc, so I ended up using an ikko itx-01 I had laying around. This unfortunately introduced a ground loop, but the ground loop switch eliminated nearly all noise. This feature alone makes the L70 a notch above its competitors. There is also a 12v trigger, which I have yet to use, but a very cool feature to automatically power the device on. I don’t really need the E70, but I like the convenience and aesthetics of having matching Dac amps. But for now, running from both my MacBook’s 3.5mm and an external dongle on my PC, this amp is amazing. I will stick with topping for dac/amps from this point forward.
Kindle Customer
Recensito nel Regno Unito il 2 aprile 2023
This is one of them finds where your left scratching your head wondering how have they done it for such a low cost I have amp from Burson that cost many times the amount and to be honest I find the topping everybit as good and as capable if not more I fully recomend this amp.Ufortuantly In the uk if we have to pay pretty much twice the cost of where these places buy these gadgets from china My advise is if you can find stock there do so and get this for much less but a brillant little quality made amp Indeed.

Potrebbe piacerti anche