El material del dispositivo se aprecia de excelente calidad

Alles bestens

La vite che serve a fissare il monitor al supporto si è rotta dopo due utilizzi. Non adeguata allo scopo

I mount this onto my FX3 vertical cage so the mount/monitor comes out what would be the bottom of the camera. Typical monitor mounts would not stay in place, become loose, have Arri locating pins which don't fit. This was the perfect solution as it has 2x 1/4" mounting points,adjustable stiffness and 360 rotations of the monitor.Very happy with the product.The only potential criticism is that after around 5 uses, one of the 1/4" screw heads have become slightly worn, so there might not be enough friction to tighten soon...

Impossibile caricare il contenuto multimediale.

I usually lean towards Smallrig for this type of stuff. Even Nitze. But I wanted a small attachment that could allow my Atomos Shinobi 7 inch monitor to attach securely and knowing payloads decrease when we use the tilt function, it had to be a higher payload than that of the equipment weight (577 g or 1.7 pounds) PLUS THOSE HEAVY NPF BATTERIES.I first used a Smallrig 2906. Beautiful piece. It worked, until the tilt. At a listed 2.5 kg payload it wasn’t enough. I then went with a Smallrig 3875 Magic Arm. This did the trick. Handles the weight with the batteries even when there’s a tilt. The drawback is it’s a bit large and clunky. But I can live with it. I also tried an IFootage MA3-4 Magic Arm. Outstanding stability at any angle. But again the size being even larger than the Smallrig 3875, we’re only getting bigger.I took a chance on the Sirui AM-MTN Camera Monitor Holder with its crazy listed payload of over 15 pounds. How can that be? Ok, so I ordered it and found it was similar in size to the Smallrig 2906. Heavier though. When i installed it I tightened it up and placed two of those big square shaped NPF batteries on the Shinobi. Fascinating how this little gadget holds all that bulk and weight. I gave it a good 45 degree tilt and fiddled with the clamps and structure. It feels like this Sirui Monitor Holder wasn’t breaking a sweat. More so, it feels like it could handle more weight. Amazing.OK, bottom line; if it lasts, holds up in the long term, then this is one heck of a monitor holder. Probably the best in its size I’ve seen.Just to close, it has an unusual gun metal colour, so it is really nice looking. It feels well built and engineered. No different in that regard (build) from Smallrig.I can’t help but recommend this piece for heavy loads. It is no August, 2024. If it fails me I promise I will update this review. But if you see no negatives of it breaking down, that means it’s still working. I’m a hobbyist, but I use my stuff nearly everyday. photography is a huge part of my life. This small attachment will get its time in immediately and often. For now, this is a home run.Recommended.

Prodotto si presenta robusto e di qualità, leggermente pesante per utilizzo su camera a mano riggata. Ho dovuto inoltre creare un piccolo spessore tra il monitor (feelworld f6)e lo snodo perché ballava leggermente. Limerò leggermente la punta e dovrebbe aderire bene.

Vi sembra questo il modo di spedire un prodotto?Arrivato con le brugole serratissime, stavo per restituirlo, sembrava bloccato. Sistema decisamente non professionale la regolazione della frizione della rotazione con brugola. Venditore poco serio.Faccio dei test.

Les pas de vis rompent sans pression particulière.

The mounting screw is itself screwed into the tighterning knob, but with very small theads that in my case shipped already broken.The female screws are worn out so it is completely unusable.Lesson learned.very disappointing. Stick to brands you know.