LUXE Bidet NEO 185 Plus – Sedile WC meccanico di nuova generazione con innovative cerniere EZ-Lift, doppi ugelli e modalità autopulente a 360° (bianco)

Did not fit swedish toilet had to return

UK install. This has taken me ages to find the correct fittings to get this to work in the UK and all the Luxe websites state that it is a 1/4" water hose fitting on the bidet itself. I found it not to be that on the particular one i had but it is 9/16" x 24 TPI (Threads per inch). So I bought a brass reducer fitting that was 9/16" x 24TPI UNEF (Unified national extra fine) female and 3/8" BSP male that will fit any generic UK water hose no problem. From the photos you can see how i then plumbed it up to my water supply. This is no means of advice on what to do but it's what i did for my application and it worked a treat.

Das Bidet ist leicht zu bedienen, der Wasserstral ist angenehm und nicht zu schwach.Das Luxe Bidet fühlt sich wertig an und ist leicht zu reinigen.Das größte Probelm, weshalb ich auch 2 Sterne abgezogen habe war, dass der 3/8" Anschluss dem Amerikanischen Standart entspricht, was in Deutschland nicht zu unserem 3/8" Standart passt.Abhilfe hat ein Adapterstück gebracht welches ich auf fittings-space bestellt habe.Wichtig ist, am Bidet ist ein 3/8" Compression (also der Amerikanische Sanitärstandart) während wir bei Sanitär BSPP (Britisch Standard Pipe Paralell) verwenden.Mit diesen Angaben lässt sich ein passendes Ersatzteil beschaffen.

I bought this Bidet on the recommendation of my son, but, while the unit comes with an installation kit the kit is different to what is required for installation in Australia. The “T” piece used between the original tap and cistern is a different size to the existing fittings, and I had to make up a fitting to do the Job.After receiving the bidet kit I realised my toilet seat was not compatible and so I bought the Luxe seat to go with the bidet. My body geometry means the aim of the bidet is accurate, and water flow and pressure is more than adequate to do what is required. I am very happy with how this thing works.

Very good.

Funcionalmente o Bidet é ótimo, nenhuma reclamação. Porém o adaptador que acompanha o produto vem no padrão para encanamento US. É necessário um adaptador para dividir a saída 1/2 em 2 saídas 1/2 e também um redutor de 1/2 para bitola da mangueira.Rodei por umas 10 lojas de material hidráulico até achar alguma que tivesse algum adaptador. Na descrição do produto menciona a medida de 3/8" para a bitola da mangueira, porem o adaptador 3/8 para 1/2 que é facilmente encontrado não serve, é maior que o necessário. Após muita busca encontrei o adaptador na mangflex em porto alegre , pelo que o vendedor disse a medida é realmente 3/8" mas para canos de cobre. Espero que essas informações ajudem futuros compradores a acharem os adaptadores com um pouco mais de facilidade.