Chegou rápido e funciona super bem. Fio e rápido para configurar.

Der BSEED Smart Lichtschalter hat mich überzeugt! Die Installation war unkompliziert (Neutralleiter erforderlich) und die Verbindung mit Alexa & Google Home funktionierte ohne Probleme. Die Touch-Bedienung reagiert schnell, und das moderne Glasdesign sieht sehr hochwertig aus. Perfekt für ein smartes Zuhause!Klare Kaufempfehlung! 👍💡

Queda genial. Yo lo devolví porque no logré conectarlo a la red WI-FI y además con las luces que tengo no funcionaba bien

Die Schalter haben am Anfang gut funktioniert, nach einem halben Jahr funktionieren alle 3 gekauften Taster nicht mehr, Schaltung funktioniert bur noch über WLAN. Das ist unheimlich nervig.Der auf Amazon angegebene Hersteller hat mir geschrieben, er kann mir nicht helfen, ich soll mich an den Verkäufer wenden. Den Verkäufer zu kontaktieren ist gar nicht so einfach, am Ende hat es über den automatischen Chat funktioniert.Ich musste dann einmal den Strom abstellen und dann hat es wieder funktioniert.Ist aber echt nervig, wenn es keine Kontaktdaten des Verkäufers gibt, nur eine Adresse in China.

Couple of points :Firstly if you're not electrically skilled please seek advice before installing this.Secondly I see this time and time again - if you do not have a neutral wire terminated in your light switch this switch will not work !Thirdly the switch itself is fairly deep and you may need a spacer around the switch if you cannot replace the back box.I already had a Wifi dimmer light switch which works really well with Alexa and the Smart Life app. I hadnt tried this brand before and generally expectations of stuff like this is that they can be difficult to set up and instructions are poor - not so here all worked like a dream.Installed 2 switches in my Daughters redecorated room. First one was 1 gang 1 way replacement for a single way switch. Straight forward wire swap and connect to neutral. Powered up and switch worked ok with touch on and off. Then pressed and held for 3 secs and red light blinks, opened smart life app and connected to 2.4 Ghz WiFi network (doesn't work on 5 Ghz). Smart life app found the switch immediately and asked for my WiFi password. It was connected within less than a minute. I got a notification on my phone from the Alexa app saying a new device had been set up in Smart Life (nice !). I could work the device immediately from Alexa but I went in to change the name of the device.I set up the second device in the same way but this was slightly more complicated electrically because it was a 2 way switch. This is where novices should seek help (or watch you tube but I didnt say that !) I identified the live supply and the switched live to the light . I then discarded all the 2 way switching wires by coiling them up in the switch box. I then connected the neutral. With so much wiring the back of the box, depth was limited and I ordered a 10mm spacer to space the light switch off the wall. Set up was then as simple as for the previous unit.These switches operate 2 banks of down lighters in the same room. from 2 locations. Once set up in the app I was then able to group them into a room and gave the room a name (lets just say Fred). I could then say to Alexa turn Freds room lights on or off and it would operate both. I could also say turn on light one or turn on light two to switch the banks on individually. My daughter is very pleased with her new lights and bluetooth speakers in the ceiling which also connect to Alexa - all from Amazon :-)