Fit 06 electra glide

Solidly made and nice chrome.Fit is excellent. I installed the chrome trim ring onto my factory front and rear turn signal lenses of my 2008 Harley Electra-glide Ultra Classic touring bike. The order of assembly steps is important. First ring will take 5 minutes. Second ring will take two minutes.1. Clean and dry everything first.2. You WILL drop the screws, so assemble over a table or tray.3. Put bike screws into your lens, you will not be able to insert bike screws in the lens AFTER you snap the lens into the chrome ring.4. REMOVE THE CHROME RING'S LONG SCREW AND BARREL NUT and set it aside.5. Align the bike screws and lens to match the bike's screw hole pattern.6. Using two hands, hold the chrome ring against your chest, with the opening gap away from your chest, like you would hold a horse shoe horn in each hand.7. Pull the ring open slightly and snap the lens into the chrome ring from the back of the ring, being careful to keep the lens screws oriented vertically, or horizontilly like your bike's screw hole pattern.8. To mount the assembly to the bike, you MUST use a long slender screw driver of medium size so you will not strip the screw or damage the chrome ring.9. Mount the assembled lens/ring assembly on the bike using the bike screws and tighten the bike screws.10. Lastly, re-install the chrome ring's long screw and barrel nut. Tighten until the gap in the ring closes completely.11. Enjoy the new look of your bike.

Rien à direBon rapport qualité prix

Je ne recommande pas pour une Electra Glide, diamètre Trop petit. Merci

Montato su FLSTC del 2010 perfetto.

finger davon weg lassen,übelster china schrott,repro,passungenauigkeiten,miese qualität,eines fehlt