Carrello

è vuoto

è vuoto
Disponibile

Haoge LF-PL14 - Anello di ricambio per treppiede per obiettivo Panasonic LUMIX G Leica DG Vario-Elmar 100-400 mm f4.0-6.3 ASPH H-RS100400

Spedizione gratuita per ordini superiori a 25,99€
45,99€ -54%

20,99€

  • Questo piedino LF-PL14 di Haoge è un piedino di ricambio per obiettivi Panasonic LUMIX G Leica DG Vario-Elmar 100-400 mm f4.0-6.3 ASPH H-RS100400.
  • È dotato di coda di rondine compatibile con Arca che consente di collegare il vostro obiettivo a testa sferica, morsetto o testa panoramica di standard Arca-Swiss.
  • Due viti di arresto di sicurezza su entrambi i lati per evitare cadute accidentali.
  • Fori riservati per viti da 1/4" e 3/8" nella parte inferiore.


Questo piedino LF-PL14 di Haoge un piede di ricambio per Panasonic Lumix G Leica DG Vario-Elmar 100-400mm f4.0-6.3 ASPH H-RS100400. È dotato di coda di rondine compatibile con Arca che consente di collegare l'obiettivo a testa sferica, morsetto o testa panoramica di Arca-Swiss standard.
Caratteristiche:
Marca: Haoge.
Con interfaccia standard AS, compatibile con tutte le piattaforme a sgancio rapido Acra-Swiss Style.
Lavorazione CNC.
Duro anodizzato per una migliore protezione dall'ambiente esterno.
Due viti di arresto di sicurezza su entrambi i lati per evitare cadute accidentali.
Fori per viti riservati da 1/4" e 3/8" nella parte inferiore.
Lunghezza: 90 mm.
Altezza: 32 mm.
Compatibile con:
Panasonic Lumix G Leica DG Vario-Elmar 100-400 mm f4.0-6.3 ASPH H-RS100400
La confezione include:
1 x Haoge LF-PL14.


Jason
Recensito nel Regno Unito il 6 febbraio 2025
Beware this will not fit something like a G9 with a battery grip or one with a built in grip like my Oly Omd-EM1X the foot at the back sticks out to far to allow the 100-400 lens to mount/twist on to the body.
DtGnome
Recensito nel Regno Unito il 14 gennaio 2024
Generally item is well made and fits both PL 200mm f2.8 and the 100-400mm perfectly. However the item is let down by the socket head set screws on the bottom used to stop the lens from sliding right through the arca clamp. The head of the screw is to small and on loosening the clamp, the plate can slide straight through and potentially you end up with the lens on the floor. The socket head set screws need to have a longer head (by +0.5mm) like on other suppliers. and have a squarer edged top, not radiused. I will change these out and the plate will be fine, but at £40 it is a severe and potentially expensive oversite which could have been avoided.