Carrello

è vuoto

è vuoto
Disponibile

Estensione per macchina per incisione CNC, strumento di regolazione ottica dell'asse Z, sensore touch con indicatore di controllo, compatibile con Genmitsu 3018-PROVer V2, 3020 PRO MAX V2,

Spedizione gratuita per ordini superiori a 25,99€
18,47€ -51%

8,99€

1.Nomemotivo:Per 3018pv2/4040pro


  • Compatibile con fresatrice/incisione Genmitsu CNC 3018-PROVer V2, 3020 PRO MAX V2, 4040-PRO e 4040 Reno
  • ➢ Con un solo clic del mouse, le fresatrici/incisioni CNC tornano automaticamente a una posizione di partenza predefinita, in modo da poter cambiare e regolare facilmente gli strumenti di lavorazione.
  • ➢ Si tratta di un pulsante Z fotoelettrico che funziona in modo molto più preciso.
  • ➢ I due display integrati ti faranno risparmiare tempo durante la configurazione. L'indicatore blu si accende quando il pulsante di misura dell'asse Z è stato collegato al gruppo di controllo e l'indicatore rosso si accende quando i bit CNC toccano il pulsante Z.
  • In questo modo la regolazione dell'altezza dell'utensile diventa un gioco da ragazzi, niente più carta. Controllo semplicissimo dell'impostazione.



Descrizione prodotto

Touch Probe

CNC Router Photoelectric

With a mouse click, CNC machines will automatically return to a predefined position, allowing you to easily change and calibrate your tools.

Touch Probe

The two indicators will save you time in the setup process. The blue indicator will light on when the Z-Axis Touch Probe connects to the control board, and the red one will light on when the CNC bits touch the Z probe.

Z-Axis Tool Setting

It comes with the 3-pin connector. Compatible with Genmitsu CNC Machine 3018-PROVer V2 and 4040-PRO.


Lane Cruse
Recensito negli Stati Uniti il 24 settembre 2024
Works Great on CNC
Siegfried
Recensito in Germania il 30 giugno 2024
Macht Was er soll
Client d'
Recensito in Francia il 15 novembre 2024
Petit objet bien pensé et plutôt mignon mais la réalisation est décevante.La touche en aluminium est brute de sciage sur la partie cachée et grossièrement tournée sur la face de contact. La touche n'est pas pas plate. J'ai plus de 0.1 mm de défaut de parallélisme.Les câbles en silicones sont très fin et ne résisteront pas aux manipulation dans un atelier.Le boîtier semble collé donc il sera impossible de changer les cables quand ils seront inévitablement arrachés par un faux mouvement.Livré dans un sachet sans documentation donc pas d'information sur le câblage et le voltage.A ce prix, c'est plutôt une mauvaise affaire pour l'usage que je souhaitais en faire...
Charles Mills
Recensito in Spagna il 8 marzo 2024
I bought this for a DIY CNC and it came with no information at all. I have no idea what the three wires connect to!
Rob
Recensito nel Regno Unito il 21 febbraio 2024
The plug will not fit the control board of the 3018PRO. It has 3 pins whereas the 3018PRO board only has 2.Returned to Amazon.

Potrebbe piacerti anche
4.9/5
11,11€ -46%

5,99€

4.7/5
10,38€ -52%

4,99€