Carrello

è vuoto

è vuoto
Disponibile

Chiodi per tappezzeria, 10 strisce lunghe 1 m, possono coprire 10 metri (nichel (tipo argento), 11 mm, DX0511NI-S1M

Spedizione gratuita per ordini superiori a 25,99€
14,93€ -46%

7,99€

1.Colore:Nichel (argento Come).


2.Taglia:7/16in (11mm)


  • Chiodi da tappezzeria in strisce lunghe, 10 strisce da 1,1 m (totale 11 metri).
  • Diametro della testa del chiodo: 7/16" --- Lunghezza della striscia : 1.1 yard x 10 pezzi --- singolo perno lunghezza del gambo : 1/2"
  • decotacks è il marchio registrato del venditore "deconail". Si prega di notare che ci sono articoli contraffatti venduti da altri venditori che utilizzano le nostre offerte.
  • Arrotolare le strisce per una spedizione sicura. Sono realizzati in acciaio con elettroplaccatura a doppio strato...
  • Essere consapevoli del fatto che il salto delle unghie può causare lesioni durante il martello; si prega di utilizzare le pinze per il naso per tenere gli steli delle unghie e utilizzare gli occhiali di sicurezza durante il martello. Eviterà inoltre di piegarsi.


Questo pacchetto include 10 pezzi di 1,8 m lungo chiodo trims e le sue borchie larghe. Con questo prodotto è possibile coprire facilmente 11 m di bordi per unghie. È necessario utilizzare solo 1 perno sciolto per ogni 5 teste per fissare il taglio al suo posto.


Guy Pepin
Recensito in Canada il 6 giugno 2023
Conforme dans le délai de livraison et la marchandise recue. Pas installer encore, reste a la faire.
Jessie
Recensito negli Stati Uniti il 17 ottobre 2023
Very easy to use, make protects looks great for less work than traditional furniture tacks. I definitely recommend them, they can be used for many different purposes as they are bendable and look great. I will get them again
Harpuneet Thind
Recensito in Australia il 9 luglio 2021
Good deal and far cheaper than Bunnings nails
AmandaE
Recensito negli Stati Uniti il 20 maggio 2021
Just what I was looking for, strips of nailhead trim that you only have to add the occasional tack to nail it down. The strips cut pretty easily with a snippers, need more than a scissor I would imagine. I also bought a set of tools to use. Came with a tack hammer and a pliers to hold the tack in place while hammering. Super helpful, I recommend this method. The only tricky thing was that if you don't get the perfectly straight up/plumb angle when starting the hammering and you try to pull it out and start over, it's very difficult to get a different angle, I found. Which makes the tack off center of the strip and it looks a bit wonky. You can tell that's the one you nailed, compared to the strip which looks perfect. Maybe you should practice on a few if you have enough materials.
JA
Recensito in Canada il 3 novembre 2021