Its not a USB to Serial ADAPTER

I used this successfully to talk to an old Cisco switches console port via my laptop - not the most demanding use at a mere 9600 baud but very effective either way and very affordable.Happy to recommend.

As has been mentioned in other reviews, this doesn't give negative voltage or particularly high voltage. This means that some devices just won't work with it, and it certainly isn't going to be good for longer distance comms where you get voltage drop over a longer cable run.So if it is for connecting to a small serial device on your desk it will probably work, but if the device is fairly old or on the end of a long serial cable then you'll find far better devices for that job at not much more cost.Widely supported chipset, so you'll be fine with most operating systems - but of limited use to me as mostly I'm interfacing with systems that need the full serial voltage range to work reliably.

I have one specific use for this serial cable which is to connect my trusty old (1990s) Hewlett Packard HP48G calculator to Windows 11 to enable backup/restore and program transfers. The chipset used is CH340 which is very common these days due to ubiquitous use in Arduino microcontroller devices and similar, so you should have no problem installing drivers. In fact the cable was recognised automatically in Windows 11 for me but that may be due to the fact I have installed the Arduino IDE and relevant drivers for that hardware, in any case you can just search for "CH340 drivers windows".Now the main problem is finding suitable software for the serial connectivity that works in Windows 11. Back in the day this was pretty simple with programs like Hyper Terminal included by default in Windows. Nowadays it's not so easy and I had to spend a whole afternoon getting something eventually to work. This is NOT the fault of the serial cable though, which is why I have still given it 5-stars, it works excellently once set up. Rather the problem is that old-fashioned RS232 data communications are not a common need for most people in 2023 so not much older software has been updated for years.Another issue is that Windows 11 has introduced new restrictions on some older drivers which it will not allow to load without turning off the new security features, so even software that worked in Windows 10 may not install smoothly in Windows 11. Eventually I found a program for HP Calculators called "HPComm" which is described as "HP 48/49 link kit for Windows 95/98/NT/2000, with an easy-to-use Explorer-like interface. Included with the HP Graphing Calculator PC Connectivity Kit and under the GPL" and available as freeware at the hpcalc.org site. This worked fine one I managed to reassign the port from COM5 to COM4 (the program only works on COM1-COM4) which you can do by (temporarily) uninstalling other serial devices in Device Manager and installing this serial-usb cable first.So moral of the story is, if you are willing to put in a few hours to get things set up you should get great use from a usb-serial cable like this one which is particularly good value too (and the CH340 chipset is well-supported in modern Windows 10/11 etc)

I bought this USB to Serial adaptor to replace a lost adaptor and it works well.I use it to connect my laptop to Network device console ports via a USB port on my laptop.You just have to plug it in to your laptop and select the correct COM port on your terminal emulator.