Carrello

è vuoto

è vuoto
Disponibile

B-100 T 2 way Component per BMW

Spedizione gratuita per ordini superiori a 25,99€
214,90€ -59%

87,99€

Informazioni su questo articolo

  • Eton b100t 10 cm 2-way Compo per BMW serie 1, serie 3, Serie 5, Serie 6 Eton B 100 T a vie Composystem per BMW 100 mm midrange con impregnati di cono di carta 25 mm tweeter a cupola morbida capacità: 50 W SPL (1 W/1 m): 86.5 dB Gamma di riproduzione: 100 – 22000 Hz Impedenza: 4 Ohm modelli auto compatibile con porta anteriore BMW SERIE 3 BMW SERIE 1 (2004 – ) (2005 – 2011) porta anteriore/posteriore BMW SERIE 5 (dal 2011) porta anteriore/posteriore BMW SERIE 6 (dal 2011) porta posteriore per tutte le BMW conducenti che vogliono aggiornare la loro auto suono e livello laterale senza dover apportare modifiche all' interno, Eton è ora lancio tre nuovi sistemi componenti sul mercato – Made in Germany tutti i sistemi che utilizzano la stessa tweeter, 25 mm a cupola in tessuto con neodimio. Per questo scopo, un midrange da 10 cm high-end viene fornito con acusticamente ottimizzato cellulosa, che – su misura per i vari modelli BMW SERIE ed è disponibile in tre diverse versioni: come flangia, ambienti umidi o altoparlante (per la sezione posteriore senza flangia piatto). Questo assicura una perfetta registrazione in fabbrica posizioni di montaggio di modelli BMW – . Ovviamente, pur mantenendo l' aspetto originale è completato il suono potente pacchetto per il woofer B 150 USB di nuova concezione, un untersitzwoofer, con disco magnetico rende la sua grande per un suono pieno volume. Il primo suono e semplice installazione, compresi i sistemi full rückrüstbarkeit di porta rendono questo Eton sistemi per una soluzione Smart Plug & Play per veicoli BMW. Caratteristiche del prodotto BWW compos 10 cm midrange driver con cellulosa, disponibile in tre versioni: flangia, ambienti umidi o piatto altoparlante 25 millimetri tweeter a cupola morbida 20 cm untersitzwoofer B 150 USB


COMPATIBILE PER BMW


Jordy
Recensito nei Paesi Bassi il 2 febbraio 2024
Speakers are a good improvement and good quality. A lot better than the original speakers from bmw e81/e87. Easy installation. Better sound, music is more clear and more bass and high pitches. Original housing has 3 screws for the main door speaker, but only 2 holes will line up with the new speaker. It will fit easily and not vibrate so far. Didn’t see any adapters or adjustments suggestions in productmanual .Keep in mind you need the tweeter housing from bmw in order to use the tweeters. It’s a option on the car, so it might not have it already. I had original bmw harman kardon tweeter housing installed prior.
Ethan
Recensito in Spagna il 4 luglio 2022
Los materiales usados tienen bastante calidad, suenan de lujo y la instalación es sencilla, no hay que adaptar cables.
Fabio
Recensito in Italia il 8 gennaio 2021
In base alle altre recensioni mi sono fidato, anche in funzione del prezzo ridotto rispetto ad altri marchi che producono altoparlanti plug&play. In realtà il suono è lievemente migliorato ma non così tanto come qualche altro utente (straniero) ha riportato. Consiglio di spendere una trentina di euro in più per montare altro.
Client d'
Recensito in Francia il 14 ottobre 2019
Nickel, une fois amplifié on se retrouve avec un son digne de ce nom
Diego Ferrini
Recensito in Italia il 28 maggio 2018
Si installa perfettamente negli alloggiamenti previsti sulla BMW. senza cambiare nient'altro il suono è cambiato dal giorno alla notte. Stavo pensando di cambiare anche quelli posteriori ma vedo che costano di più, non capisco, in teoria dovrebbero essere identici
Sam's Motor & Machine
Recensito nel Regno Unito il 15 dicembre 2018
My 2010 F11 had the base audio system (4 speakers, 2 underseat woofers). Coming from a Lexus which had the awesome Mark Levinson 13 speaker system, the BMW system was totally underwhelming. This ETON kit has gone a long way to rectifying that, with the main benefit being adding the much needed tweeters in the front mirror sails. Music and voices now come through crisply and cleanly, and the ETON door speakers produce much more punchy mid and low end than the standard speakers. Magnets are about twice the size/weight.While it still doesn't match the Lexus ML system, it may come close when I replace the woofers and rear speakers with ETON equipment.Installation was extremely straightforward. If, like me, your car didn't have tweeters originally, then you will need to buy the correct mirror sail panels from BMW (around £20 for the pair). The speakers fit right into the original mounts with no modifications. Took around 45 minutes to do both sides.Overall, highly recommended and I will be purchasing more ETON products in the near future.
simo
Recensito in Germania il 27 giugno 2015
Der umbau hat ca. 1,5h gedauert, wobei ich mir Zeit gelassen habe. Mit dem "BGS Zierleistenkeile-Set 3027" ging der umbau lt. Video auf der Homepage von Eaton ganz einfach. Ich hab mir Systeme von 1000.- € bis 1800.- angehört, klar sind die besser, aber ich finde den Preisunterschied von 200.- zu 1000/1800.- € steht in keiner Relation zu der Klangverbesserung.Ich hatte vorher (X1) 2x Mitten und 2x Bass unter dem Sitz (BMW) - durch den Umbau sind die Höhen plötzlich da (klar vorher gab es keine Hochtöner) und die Mitten viel wärmer/präsenter. Ich hatte links die neuen Boxen drin und rechts die alten, mit dem Fader hin und her geschalten (Bass ganz aus), die alten Boxen klangen nach dem "Kofferradio von meinem Opa" die neuen nach "gutem Sound".Was man nicht erwartet darf: Bei den teuren System hört man ja wirklich "wo" der Sänger auf der virtuellen Bühne steht, das kann das System nicht (dazu braucht es vermutlich einen DSP), die Top-Lautstärke wird nicht lauter (gefühlt minimal), dazu bräuchte es einen zus. Verstärker, der Bass wird nicht viel knackiger, dazu müsste ich noch die normalen BMW USB gegen die "B 195 Neo BMW Untersitzwoofer" tauschen UND dazu bräuchte es einen zus. Verstärker.Das schöne, man macht kein Geld kaputt, wenn man so wie ich kein BMW "Hifi" oder besser im Auto hat, hat man erst mal ein deutliches Plus durch die B-100 T. Wenn das nicht reicht macht man mit den USB Tausch weiter, wenn da nicht reicht, kommt die neu Verkabelung und Verstärker/DSP.