Qualité ram

Perfect! as advertised.

Usato per montare navigatore sul una piastra della moto in cui avevo già il foro. Consiglio il dado autobloccante per chiuderlo

Tutti, e dico tutti, i prodotti RAM-MOUNT sono realizzati con "criterio". Risolvono mille situazioni, e lo fanno con successo. Ho il supporto per il TOM TOM e del cellulare per la moto, per l'auto. Ho tutti i supporti per il montaggio della GOPRO per auto, moto e mountain bike, per il montaggio della mia Nikon ecc ecc.Dopo il primo acquisto, ho valutato la qualità effettiva del prodotto, adesso ho una valigetta con ogni tipo di fissaggio, staffe, staffettine, viti, supporti, e tra questi, tre utilissime ventose per il vetro (consiglio caldamente la doppia ventosa per l'uso della GOPRO, eccezionale).

Muy practico para usar la moto como trípode de mi réflex, los accesorios Raw te da soluciones para todo, muy practico

Prodotto originale della "RAM" e per cui di altissima qualità costruttiva: preciso, robusto, resistente ed elegante. Prodotto e venditore consigliatissimi

Ottimo articolo quello che cercavo prezzo accettabile anche se devo ammettere che ho trovato un altro sito che lo vendeva a meno prezzo però non conoscendolo ho preferito andare sul sicuro. Grazie come sempre per la puntualita

I used this RAM Mount 1-inch Ball with 1/4" 20 Threaded Male Post in 2 locations as part of a dash cam installation in my car, which has a long, angled windshield. As I didn't want to trust the suction cup mount included with the camera, I used a Ram Mount Rail Base with Stainless Steel U-Bolt attached to the rear mirror stem to begin the installation and then added several components, including a tee assembly that employs a RAM Mount Double Ball Base w/1/4" NPT tee (modified - see below)* with this Ram Mount 1-Inch Ball with 1/4-Inch 20 Male threaded post and a RAM Mounts RAM-B-238 RAM 2.43" x 1.31" Diamond Base paired with a Ram Mount Light Series Composite Double Socket in order to connect another leg to a RAM Mount Suction Cup Base stuck midway down the windshield for additional stability as the entire installation extends nearly the full angled horizontal distance. It's suspended over the dashboard a couple of inches. There is no "bounce" in the system because of this RAM Mount 1" Ball employed with the other components. It's rock-solid. I added a Ram Mount EZY-Mount Quick Release Adapter at the lower end of the installation to allow for easy removal after simply unplugging the power cable, which travels back up and over the RAM Mount system to disappear into the headliner, then over to and inside the side post and, finally, courses under the dash to the power connection.Like almost all RAM products, this is a quality item that works well in its intended use. I'll purchase this and other RAM products again if needed.*The RAM Mount Double Ball Base w/1/4" NPT tee does not directly accommodate this RAM Mount 1-inch Ball with 1/4-inch 20 male threads, as the threads don't match. Instead, it accommodates 1/4" NPT (National Pipe Thread standard), which is about 1/2" in diameter with 18 threads per inch. (Weird, huh....?) I successfully modified it by threading a brass 1/4" NPT solid plug, cutting it off flush and then I drilled it with a 7/32" bit, finally finishing it off by tapping the drill hole with a 1/4" 20 threads/inch tap. Thus the RAM Mount 1-inch Ball with 1/4-inch 20 Male threads fits it as if it were designed for that purpose. (And, I guess I did...) So, if you're handy, just about anything is possible. (There's more than one way to skin a cat....as I've heard it said...) It may be notable to be aware that 1/4" 20 threads per inch is the same as a tripod mount.

For what it is, it is functional. Utilised to make a mount for a camera with outer ram parts. Would not use this to mount the camera as has no base flange, but works ok to screw into the clamp I am using.