Carrello

è vuoto

è vuoto
Disponibile

868MHz LoRa V3 LoRa32 ESP32 OLED + Antenna LoRa 868 MHz + Custodia LoRa Ensosure Cover per Meshtastic, non compatibile con Heltec LoRa 32 V2

Spedizione gratuita per ordini superiori a 25,99€
37,98€ -47%

19,99€

Informazioni su questo articolo

  • -Quando si utilizza lora esp32 868MHz, è necessario utilizzare 2 pezzi insieme, uno di ricezione e un altro di invio.
  • -È possibile alimentare la scheda lora v3 tramite batteria al litio da 3,7 V, pin da 3,3 V / 5 V o tipo C 5 V a bordo. Per farlo funzionare meglio, si consiglia l'alimentazione di tipo C a 5 V.
  • -La custodia lora ha un requisito rigoroso in termini di dimensioni dell'antenna lora che si adatta ad essa, quindi significa che non tutte le antenne sono adatte ad essa.
  • -Riceverai 1 scheda esp32 lora V3 a 868 MHz con intestazioni pin NON saldate, 1 cavo da 1,25 mm-2p, 1 custodia lora v3 e 1 antenna lora 868 mhz.
  • -In caso di problemi, si prega di contattare il venditore come segue: fare clic su "DIYmalls" (è possibile trovare "Venduto da DIYmalls" sotto il pulsante Acquista ora), nella nuova pagina, fare clic su "Fai una domanda".



Descrizione prodotto

868 esp32 lora v3

LoRa 32 è una classica scheda di sviluppo ESP32 amata da sviluppatori e produttori. È una buona opzione per città intelligenti, aziende agricole, case, controllo industriale, sicurezza domestica e sviluppatori IoT.

Rispetto alla LoRa V2, la versione LoRa V3 utilizza un MCU diverso, quindi la piedinatura non è la stessa. LoRa V3 mantiene W - F, BLE, LoRa, display OLED e altre caratteristiche, ma è il miglioramento di LoRa V2, non la sostituzione della versione LoRa V2.

diymalls wifi lora 32 application
wifi lora 32

Piccola antenna LoRa progettata per adattarsi alla custodia LoRa

lora v3 size

Proteggere con schiuma bianca e scatola di plastica per evitare danni

wifi lora 32 v3

Dooom Luvver
Recensito negli Stati Uniti il 1 marzo 2025
They com with a case, and a horrible but usable antenna. But with that and a usb port to plug it into on say, a computer or power bank, its enough to dive into LoRa and meshtastic! There are also a lot of better 3d printable cases online that are free to download. I do reccommend getting a dedicated battery and antenna at least as the basic upgrades. The esp32 board is more "power hungry", but with a decent battery and power bank it will run for a long time. Remember to disable wifi or bluetooth depending on what your are using to connect your phone or computer to the node for messaging and settings. This will help it use a lot less power and run a lot longer. For the price, these are probably impossible to beat! Have a good one, and hope to see you on the mesh!
Shade tree
Recensito in Canada il 9 dicembre 2024
Exactly what is needed for a starter to the meshtastic world.
Nomad
Recensito in Francia il 5 novembre 2024
L'objet correspond bien à mes attentes. Je suis encore en train d'effectuer des tests de portées mais je suis déjà satisfaits.
Daniel White
Recensito nel Regno Unito il 23 novembre 2024
The Heltec v3 has almost become synonymous with Meshtastic, 85%+ of the devices I see out there are Heltec v3s. This package is great to get you started with the world of Meshtastic; you have everything you need to made your first node.The Device does not come flashed with Meshtastic firmware out of the box but this is easy to do following the simple steps online.Whilst thr included antenna is not going to win any awards, it is completely capable of picking up nodes when you are outside.
Z3PHIR
Recensito in Canada il 18 ottobre 2024
This started out to be a good antenna but the antenna keeps falling out (too loose) and a couple days later, the board just stopped working. Returned for refund.

Potrebbe piacerti anche