Carrello

è vuoto

è vuoto
Disponibile

868 MHz ESP32 LoRa V3 SX1262 OLED Scheda + custodia protettiva LoRa + antenna LoRa 868 per Arduino Meshtastic LoraWan IOT (confezione da 2)

Spedizione gratuita per ordini superiori a 25,99€
64,98€ -57%

27,99€

Informazioni su questo articolo

  • -L'antenna Lora grigia è piccola, quindi può essere inserita nella custodia bianca Lora. Ma altre grandi antenne 868 non possono essere utilizzate con lora board quando lora caso installato.
  • -La custodia Lora ha un requisito rigoroso in termini di dimensioni dell'antenna lora che si adatta con esso. Significa che non tutte le antenne lavorano con esso.
  • -Questa scheda LoRa da 868 MHz viene fornita smontata, è necessaria la saldatura per te, non dotata di batteria al litio.
  • -Quando si utilizza questa scheda wifi oled 868MHz Lora 32, è necessario utilizzare 2pcs insieme, uno per la ricezione dei dati e un altro invio.
  • -0.96 oled è montato su esp32 lora board tramite 4 viti, quindi è rimovibile, ma si prega di fare attenzione a farlo per evitare danni.
  • - Riceverai 2 schede Lora esp32 da 868 MHz V3, 2 custodie Lora per esso, 2 antenna Lora 868 MHz e 2 cavi connettore da 1,25 mm.



Descrizione prodotto

868 esp32 lora v3

LoRa 32 è una classica scheda di sviluppo ESP32 amata da sviluppatori e produttori. È una buona opzione per città intelligenti, aziende agricole, case, controllo industriale, sicurezza domestica e sviluppatori IoT.

Rispetto alla LoRa V2, la versione LoRa V3 utilizza un MCU diverso, quindi la piedinatura non è la stessa. LoRa V3 mantiene W - F, BLE, LoRa, display OLED e altre caratteristiche, ma è il miglioramento di LoRa V2, non la sostituzione della versione LoRa V2.

diymalls wifi lora 32 application
wifi lora 32

Piccola antenna LoRa progettata per adattarsi alla custodia LoRa

lora v3 size

Proteggere con schiuma bianca e scatola di plastica per evitare danni

wifi lora 32 v3

Robin W Chahal
Recensito in Canada il 15 gennaio 2025
I'm finding the effective range going through forrest is about 500 meters.Setup is fairly straight forward. Plugging in the antenna is a little difficult.
S-word
Recensito negli Stati Uniti il 4 marzo 2025
product exactly as described. if you are looking to get started with Lora and/or meshtastic, this is a great first purchase. you get 2 dev boards so you can use them to see/ talk to each other to make sure they are working and to experiment with them. easy assemblage and setup, no tools required other than a desktop or a laptop and a usb cable to connect it to your computer to flash/ install the firmware. there are plenty of great videos to walk you through it step-by-step. one tip: if your computer is not detecting the dev board during the flashing process, you may need to download annd install the serial drivers ( CP210X USB to UART bridge) .i went into this with zero experience with hobby radio or hobby electronics and am very happy with the results. if I can do it, you can do it, too!
luca 73
Recensito in Italia il 8 aprile 2025
Ottimo prodotto consegna puntuale
Customer
Recensito negli Stati Uniti il 29 giugno 2024
Got it all put together -- watched some YouTube videos but still had issues programming the board -- might be something I am not doing right also -- keep trying to program it
nicolas
Recensito in Canada il 7 novembre 2024
Easy to setup
Cole
Recensito in Canada il 28 aprile 2024
No problems using this for Meshtastic. Antenna works and fit in the case. Some assembly was required but no soldering. It's not shown in the photos, but the product comes with header pins to be soldered onto the Heltec board if you wish, as well as a battery connector cable.

Potrebbe piacerti anche