X5pcs 2S 5A Li-ion 7.4V 8.4V 18650 BMS PCM Battery Protection Board BMS PCM for Li-ion Lipo Battery Cell Pack

Modello: HX-2S-01.
Over charge voltage:4,25-4,35 v±0,05 v
Tensione di funzionamento: 2,3 – 3,0 V ± 0,05 V.
Corrente massima: 5 A.
Max Peak Current:7A
Temperatura di funzionamento: -40 ---+50
Temperatura di stoccaggio: -40-- +80
Small current:less than 3uA
Life cycle :more than 50000 hours
Resistance:Less than 45mΩ
Short cut protection :Protectable,charge can repair
Dimensioni: 38 x 8 x 2,5 mm.
Caratteristiche:
1) Alta precisione voltage detection circuit;
2) terminale del caricatore using ad alta tensione device;
3) Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit);
4) Transistor MOS can control the battery charge and discharge;
5) Low standby current consumption.
Connettore:
B +: Connected to the battery positive
B-: Connected battery negative
MB : Connect the point between battery 1 & battery 2
P + : Charge / discharge side positive (shared charge / discharge side)
P-: Charge / discharge terminale negative (charge / discharge side shared)

Contenuto della confezione:

5 x 2S 5A Li-ion Lithium 7.4V 8.4V 18650 Battery Protection Board