è vuoto
è vuotoNota: il prodotto è relativamente leggero e può essere facilmente schiacciato a causa di un trasporto violento. Se avete problemi, vi preghiamo di contattarci prima per assistenza.
Daniel Hughes
Recensito nel Regno Unito il 30 luglio 2024
This is not suitable nfep for resin printing, firstly it is an uncut roll and has a natural curve to it, secondly rather than two hydrostatic sheets on both sides this instead has a residue ridden single sheet that is simply rolled with it.This is definately not from chitu, or anyone who knows what resin printing is or how the fep should be treated, i highly doubt this is nfep at all, total waste of money (havnt been able to stretch it out and measure as the glue and protective sheet are ripping and sticking everywhere and its already way to messy to consider using)
AW
Recensito nel Regno Unito il 30 gennaio 2023
As other review states, this comes with poor packaging. Not suitable for newbies as it has not instruction.Fitted this nfep. But it is sticky. Build plate sticks to it even on simple previous perfect print files. Tried a number of different resins with recommended settings. Every print failed. Waste of time and resin
Steve R.
Recensito nel Regno Unito il 26 gennaio 2023
Purchased for the Photon Might 8K.Does not arrive flat packed, not much of an issue, but is much more prone to damage for people not used to handling the stuff.I'm no stranger to fitting FEP or NFEP, but even after using the "bottle cap" method and the manufacturers method when fitting, and adjusting the tension manually, nothing could stop prints from sticking to the FEP. Even adjusting cure times didn't make any difference.When the build plate sticks to your vat even when printing a calibration piece; you know you're in trouble.The official NFEP might be the same price for a single sheet, but its way better value for money when you take into account time, wasted resin and potentially burning your z-axis motor out.Avoid like the plague.
Daniel Lane
Recensito nel Regno Unito il 7 marzo 2023
The item description is for "Size: 220x180mm",Thickness 0.15mm Pacakge:3 piecesThey will send you 140x200mm sheets, which will not work with any of the following printers listed on this product listing:Anycubic Photon Mono M3/M3 Plus/M3 Max/Saturn 2/Sonic Mega 8K. Don't even bother buying these FEP sheets if you own any of those printers.
Ira
Recensito in Spagna il 16 novembre 2022
Añadir un vídeo del montaje sería una opción muy importante por si alguien nunca montó las láminas
Prodotti consigliati
Potrebbe piacerti anche