Ösen mit Scheiben

le sertissage avec l'outil livré est de bonne qualité et semble solideJ'ai utilisé ces œillets dans les coins d'un tapis de douche, pour pouvoir le suspendre et c'est parfait pour l'usage

Ottima qualità.

Ottimo articolo

Molto semplice da usare

Lo strumento è privo della possibilità di tagliare la stoffa in cui inserire gli gli occhielli, come illustrato dal video. E' stato necessario tagliare la stoffa con delle forbicine.

Gli unici occhielli che compro e con cui mi trovo bene.Li uso per amache per roditori che sono soggetti a usura e lavaggi in lavatrice, restano perfette e resistente, non si ossidano❤️Super super consigliati.

DI FACILE USO E QUALITATIVAMENTE RESISTENTI.

Li ho utilizzati per appendere una gigantografia di circa 4/5 metri per 3, facili da montare hanno un ottima tenuta, la gigantografia resiste in semi-esterno da almeno un paio di anni!

Kwaliteitsproduct, maar de montage instructie zou duidelijker kunnen; het is moeilijk te zien welke kant van de sluitring onder of boven moet (voor zo'n simpel item zou 'onder of boven' geen verschil mogen maken).

muy sencillo de manejar, y muy útil, perfecto para lo que necesitaba

Ich habe mich für diese Ösen entschieden, weil ich auch beim Nähen immer wieder gerne auf Produkte der Marke PRYM zurückgreife. In diesem Anwendungsfall wollte ich Ösen bei Fahnen ergänzen, die auf einer Seite bereit zwei Ösen hatten. Um eine Öse in jeder Ecke der Fahnen zu haben, habe ich dieses Set gekauft. Die Ösen waren innerhalb von wenigen Minuten ordentlich gesetzt. Das beigefügte Werkzeug war für mich leicht bedienbar und hat gute Ergebnisse geliefert. Ich würde es wieder kaufen.

Perfetti per lo scopo, ottimo rapporto qualità prezzo. Attenzione nel montarli correttamente prima di battere e di lasciare congruo spazio dal bordo del tessuto, altrimenti rischia di strapparsi

I managed to fit these eyelets on some heavy canvas I had made into a large luggage protection bag and I'm just about the last punter you'd look to ask to do such a job. Whilst there is not a lot of instruction beyond the wee pictures on the packet the eyelets come in there is enough to tell me how to do it. One bit of advice I would give to others regarding the fitting of these eyelets is to make sure you separate all the eyelets from the washers before starting as I, having failed to do this, managed to fit two washers on one eyelet as one of the washers was on the eyelet as I put it through the punched hole so when I fitted the other washer on the opposite side I was actually fitting it on top of the other washer. It took me long enough to work out why there was a washer missing and I did eventually prise the washer and eyelet apart but if I had just taken my time and separated them before I started the whole job of fitting these eyelets would have been done in a few minutes. The hole making punch is a simple and easy to use little tool.