Ottimo prodotto per avere breadboard ed Arduino (o Raspberry, io l'ho preso per Arduino) in un unico "vassoio" da portare in giro.

E' perfetta per alloggiare scheda Arduino o similare fissandola con delle viti per tenerla ben salda.Ha uno spazio dedicato per una bread board fino a 800 punti molto comodo.Se usate come me Arduino Mega, rimarrà libero lo scomparto del rasperry pi e viceversa se invece utilizzate il raspberry pi, lo scomparto per l'arduino rimarrà vuoto, permettendo di alloggiarvi sensori, o una breadbord aggiuntiva piccola.Il mio asupporto è arrivato un pò deformato, nulla di grave, e per questo do 4 stelle.

I'm using it to house the breadboard and the Uno microprocessor...keeps everything neat and convenient. Am totally satisfied with it. Good sturdy construction, holding screws an the screwdriver are very helpful.

Verwende dieses Experimentierboard schon seit einiger Zeit für Experimente mit einem Arduino oder mit einem Raspberry Pi. Das Handling ist super und vereinfacht das Experimentieren erheblich!Die Befestigung für z. D. den Arduino ist sehr langlebig, da die Gewinde aus Metall gefertigt sind.Alles ist sehr passgenau und funktioniert super.Das Breadboard wird ebenfalls auf diese Halterung geklebt und damit ist alles auf einem Brett fixiert und man kann die Verkabelung schön fixieren und alles hat seine Ordnung. So kann man das Experiment gut von A nach B transportieren und alles bleibt schön und sicher erhalten.Auf der Rückseite sind kleine Gummifüßchen angebracht und somit liegt das Board auch schön auf einem Tisch. Ein tolles Produkt, was das Arbeiten deutlich erleichtert.Der Preis ist noch in Ordnung, könnte etwas günstiger sein.Hoffe die Infos sind hilfreich (über ein "Nützlich" freue ich mich).Von mir gibt es eine klare Kaufempfehlung!

Comes with some screws, pads and a mini screwdriver and the mega2560 R3 fits perfectly in the larger compartment, the Pi4 in the second and have wired some stuff onto a board that fit in the largest copartment (glued/taped board)

L’arduino est super bien maintenu, les points de fixations sont bien placés. La breadbord est bien en place dans son emplacement. C’est super pour mes prototypages.

Non c’è molto da dire. Il prodotto è molto funzionale e utili. Ti permette di avere un piccolo spazio per prototipazione. Plastica molto resistente, fori precisi.

Buon prodotto e robusto.Avrei preferito che ci fossero stati altri punti dove fissare schede di diverse misure.Bastava fare più rivetti filettati e mettere delle torrette in dotazione per fissare qualsiasi tipo di scheda.Così si può fissare solo una scheda di Arduino.

ottimo prodotto, rigido e funzionale, le board entrano precise negli alloggiamenti ed i fori di fissaggio sono precisi, la RAB non scivola durante l'utilizzo grazie ai gommini in dotazione, perfetto anche per la board 830 punti. La consiglio

Questa piccola board, che accoglie sia Arduino che Raspberry, c'è uno spazio per entrambi, è molto pratica per divertirsi a sviluppare dei piccoli prototipi in maniera ordinata e funzionale. L'unica cosa che aggiungerei sono almeno 4 piedini di gomma, quelli piccoli, adesivi, in moda da rendere il fondo meno scivoloso.

UPDATE: January, 2019: I've since started incorporating Rasperberry Pi projects in with my Arduino stuff. So I now have both an Arduino Mega and a Raspberry Pi 3 B+ mounted in this tray. Everything fits perfectly, and a year after my initial purchase, I am still very happy with this product. In fact, I should probably pick up another, as I rarely only have one project going at a time anymore. I still whole-heartedly recommend this product, and have upgraded it from 4 to 5 stars, as, in reflection: I dont think it was fair to remove a star for not having over-engineered screw mounts for everything under the sun. This device does exactly what it says it will do, and it does it flawlessly, and is made to better quality than I expected it to be (what a rare treat these days, right?) That should be the definition of a 5 star product.ORIGINAL REVIEW: January, 2018:This is a really handy product; more than you'd imagine. Because of a spinal injury, I don't work at a desk, I generally work in bed. And this device helps me keep the project, and all the little pieces attached to it, all in once place. It prevents connector wires and header pins from being strained or bent by one part walking away from another as you work. And when I'm done for the day or need to step away, having the whole project attached to a single board, makes it really easy to pick up and put away somewhere safe (or to transport to another room). Before buying it, it seemed like an unneeded extravagance, but once I used it, I can't see how I could go without it.All screw holes lined up perfectly with my Arduino Uno and Arduino Mega. Being that I don't currently have any Raspberry Pi projects going, I actually have two Arduinos mounted in this tray. I have the Mega mounted in its intended spot, and I mounted an Uno in the spot reserved for a Pi. Those screw holes don't line up of course (as it is not designed to hold a second Arduino), so I just picked one screw hole that was close enough, and added a piece of foam behind the board to keep it from flexing if pressed. The single screw holds it in place well enough. However, if I could make only one suggestion for improvement, it would be to add "alternate" screw holes, so two Arduinos (or two Pis) could be mounted on the tray for users that don't cross their Arduino and Pi projects. Perhaps using removable stand-off mounts, so as to not cause incompatibility problems between the different controller boards. However, this is just a suggestion, not a complaint.The plastic is well formed and cleanly cut. There was no flashing or seams to trim away, and the METAL screw mounts (so refreshing to see a manufacturer use good quality parts, instead of just giving you threaded holes in plastic to screw into!) were all perfectly formed and lined up.I found this to be a well made product, and it has been more than worth what it cost me. I would happily recommend it to a friend and/or purchase it again.

Finalmente un prodotto bellissimo che mi ha permesso di realizzare prototipi con Arduino in maniera molto comoda, ordinata ed elegante. Su questa base ho avvitato un Arduino Uno( i fori sono precisissimi) ed ho incollato una breadbaord standard ed una mini breadboard. Quando si usa, i vari moduli si collegano alle breadboard ed ad Arduino in modo molto compatto, stabile ed ordinato senza avere il solito disordine di cavi e moduli sparsi in giro: il pezzo diventa unico, facilmente spostabile e riponibile senza scollegamenti vari.... La consiglio molto agli appassionati del settore. Arrivata puntualissima come sempre, è fornita con viti e cacciavite a corredo.

Acquistata per avere tutto in ordine e devo dire che non delude le aspettative, realizzata con plastica rigida rimane molto stabile . Le scheda ( nel mio caso Arduino Uno ) si incastra benissimo e molto utili anche le viti di bloccaggio. Preciso anche lo spazio dedicato alla Bread Board.Vengono fornite assieme alla tavoletta anche viti di bloccaggio per le varie schede e un cacciavite a stella.