è vuoto
è vuotoKit installazione completo di cavo perimetrale, picchetti, giunti e connettori di varie grandezze e lunghezze, ideali per ogni tipo di giardino. La scatola contiene un cavo perimetrale lungo 250 m con diametro di 2,7 mm, 400 pezzi di pecchetti, 5 connettori e 3 giunti. Ideale per grandi prati aperti fino a 2.000 mq o complessi fino a 1.000 mq. Compatibile con tutti i tipi di Robot Automower Husqvarna.
Josef Schrattel
Recensito in Germania il 28 gennaio 2025
Wie beschrieben, passt perfekt
Fabio
Recensito in Italia il 1 maggio 2023
Ottimo , tutto come da descrizione, consegna veloce
luca
Recensito in Italia il 20 maggio 2021
Rispettati i tempi e prodotto conforme all’ordine. Molto buono il prezzo
Tony Linden
Recensito nel Regno Unito il 25 luglio 2020
Best price
AspryWrites
Recensito negli Stati Uniti il 24 ottobre 2020
I bought this kit as a safeguard because I didn't know if the kit included with the mower had enough stuff. It didn't and thankfully I was prepared.The mower came with a 250 meter cable. This kit came with 500 meters of cable. I used the whole thing and it was just enough to add a guide wire at the end.The mower came with 2 bags of spikes. This kit had two bags and I also bought some extras because I didn't have the tools to embed the cable into the ground. So I opted to just use extra spikes. This kit saved me again.I definitely scored by taking a chance on this purchase. I was able to work confidently and freely when the mower's included tools didn't measure up.Okay bye.
Castro
Recensito in Francia il 26 marzo 2020
Quelques problèmes dans le suivi de l'expédition mais sinon le produit est conforme au descriptif et complet.
Winky
Recensito in Italia il 21 aprile 2019
Buon prodotto, costo spropositato ma in linea con il mercato .
Chris Schellmann
Recensito in Germania il 24 aprile 2018
Nachdem wir unseren Garten via Google Maps vermessen hatten und dieses Paket beim Aktionspreis dabei war hatten wir uns eben für dieses entschieden.Das Paket beinhaltet 250m Draht auf einer Haspel, dazu alle nötigen Klemmen plus Reserveklemmen und die Erdhaken, die wir allerdings nicht benötigten.Mit dem Spaten wurde rund um das Gelände mit Abstand zu den Mauern / Pflaster oder Blumenbeeten, wie in der Anleitung des Mähroboters beschrieben, eine Nut gestochen, in dem wir den Draht hinein legten. An den 2 Enden wurden dann die Klemmen draufgedrückt und das überstehende Kabel abgeschnitten (hierzu ist eine Kombizange erforderlich). Zudem wurde der Suchdraht mittels beigelegter 3-fach-Klemmen zusammengeschaltet. Hierbei ist allerdings darauf zu achten, dass diese 3-er Klemme vollständig zusammengedrückt wird, ansonsten kann der Roboter einen Kabelbruch melden. Sollte es doch zu einem Kabelbruch beim Verlegen gekommen sein, so lässt sich die entsprechende Stelle mittels Mittelwellenradio relativ gut finden.
Prodotti consigliati