è vuoto
è vuotoDescrizione prodotto
PULIZIA
- Se necessario, una rapida pre-pulizia dei punti più difficili
- Panno umido per rimuovere i contaminanti
- Passaggio finale con panno asciutto
APPLICAZIONE DEL PRIMER SULLA SUPERFICIE
- Applicare il primer, il primer su un panno monouso, seguito da un panno asciutto.
- Flacone a spatola seguito da un asciugamano asciutto
- Pennello di schiuma
- Lasciare asciugare prima di nastrare
APPLICAZIONE DEL NASTRO
- Iniziare il nastro dal bordo della superficie e stenderlo, esercitando una pressione costante.
- Rimuovere il rivestimento protettivo per applicare l'altro substrato.
APPLICAZIONE DELLA PRESSIONE FINALE
- In genere, ciò si ottiene applicando una pressione superiore a 15 psi alla linea di incollaggio del nastro.
Livia G
Recensito nel Regno Unito il 24 gennaio 2025
I used this to stick double channel plastic track to the top and bottom of lightly varnished wood veneer shelves indoors.It’s very easy to use if you follow some basic rules:1. Remove grease and dirt from both surfaces before application and let it dry - I used isopropyl alcohol (available on Amazon)2. Do not pull the tape off the roll quickly - it will stretch if you do, then it will detach itself from the surface as it tries to shrink back to its original shape3. Use sharp scissors to cut and trim, not a blade - it welds itself to a Stanley knife blade as soon as you slide the blade across it4. Do not drop it on the floor - there are no side covers so you will find yourself picking off bits of fluff and grit for ages5. After applying to the first surface use fine point tweezers to peel off the red backing - use the same technique as for removing the backing from cardmaking foam pads.i.e. press down firmly with the flat edge of the tweezers onto the red tape, roughly 2mm from the end. This puts a dent in the tape and loosens up the very end of the red tape. Slide the tweezers under the red tape and peel. The dent does reshape itself after a couple of minutes6. Is it the correct product for your application ?I’ve read a few comments that say that this type of tape is rubbish because it was used to stick a hook to a painted wall. The hook fell off when a coat was hung on it. The tape stayed attached to the hook and it pulled off a large chunk of wall paint with it. This product is designed to bond to the surface it is applied to, not the substrates. Effectively they have used it to stick the back of the hook to a very thin layer of emulsion paint. It’s the weak bond between the paint and plaster that failed, not the tape.
Floratos Gerasimos
Recensito in Francia il 17 febbraio 2025
very difficult to unstick the protective material, strong enough for light things.
TGlenn
Recensito negli Stati Uniti il 15 febbraio 2025
This tape works great! I had previously tried another name brand of double-stick tape which didn't even hold for 12 hours. This 3M tape is going on two days now with no sign of weakening. It was recommended by a friend of mine and I was kind of skeptical but am glad I got it.
Matthias P.
Recensito in Germania il 26 aprile 2025
Sehr gute klebkraft super
Bench20
Recensito in Canada il 22 aprile 2025
As described
Prodotti consigliati
Potrebbe piacerti anche