résolution suffisante pour des applications en cours de mathématiques

La he devuelto, la impresora imprime con calidad más que suficiente, pero el software es simplemente malo, se cuelga continuamente, la conexión por Wifi funciona cuando le da la gana, he tenido problemas con la auto calibración un par de veces y al final he acabado bastante frustrado. Si no mejoran el software, no la recomendaría.

Achat effectué pour ma fille de 12ans. L'imprimante fonctionne correctement et est facile à installer et prendre en main. Par contre, et ce n'est mentionné nulle part, il faut utiliser exclusivement du filament de la marque (XYZ Printing) sans quoi le compteur de fil intégré ne se remet pas à zéro et finit par bloquer l'imprimante. Donc si vous achetez ce produit avec des bobines de rechange ou de couleurs différentes, ne faites pas comme nous, commandez du filament XYZ Printing.

Excellant mais le fil de la marque peut avoir un défaut de fabrication qui bloque la buse il vous faudra pour ce faire décharger le filament couper 1,5 mètre et tout remarchera mais s’il vous plaît faite de vrais petit taquet pou enlever la la bande d’alimentation de la buse ils se sont cassé en 15 jours mais sinon un super produit .

Overall, pleased with the product and the quality of the few items that I have printed so far. This is my first 3d printer, so I only have my expectations and a few youtube videos to compare it to.Good things:1) Easy to setup and assemble the hardware out of the box.2) Easy to load / change the filament reels.3) Software is not sophisticated and not beautifully designed, but it is simple to load models and get them printed. Also, easy to work out how to load/unload filament reels and to run calibration. (Mac OSX)4) Have had zero issues with models slipping or moving on the bed, I have used the supplied bed covering tape and standard pritt stick glue for all my prints.5) Quality of the prints so far has been good.Bad things:1) The printed instructions contained in the box for the software installation are wrong. They suggest you should install XYZMaker (which, having spoken to the support team, used to be correct), but now you need to install XYZPrint to actually print any models - wasted lots of time trying to work out why my new printer was not visible to the XYZmaker software as shown in the printed instructions. The website and support articles all show/direct you to the even older software XYZWare (which also does not work with this printer), in the end it was a simple call to the support line that resolved my problem, but due to the Christmas and New Year shutdown, this was several days after I unboxed the printer.2) Filament reels are quite expensive and you are locked to the XYZ branded reels only.3) Printing is quite slow.4) On 75% of prints, just after the head has reached temperature, it moves to the far right of the bed to extrude 2 longs lines of filament to make sure that it has the clean flow of material before it begins printing the model. As the head sweeps across the bed to the right, it drips a small amount of material on the bed (often where it will then want to begin printing) - this is easily removed if you are watching, but means that you might end up with some messy elements.

Bella facile e utile però stampa troppo piccolo e poi ha il limite di montare solo filamenti della casa produttrice e in Italia nn è possibile acquistare il carbonio o altro... molto caro il filamento Pla